DISCOUNT CODE(S): BANDW10-10% OFF $100 OR MORE AND BANDW20-20% OFF $200 OR MORE

Chenille Letter Patch Application Instructions

Chenille Letter Patch Application Instructions

These Chenille Letter Patches can be applied to denim, 100% cotton, and polyester/cotton blends on light and dark colored garments.  They can be applied to hats, bags, t-shirts, sweatshirts and so much more. 

THESE PARTICULAR LETTER PATCHES CANNOT BE APPLIED TO ANY TYPE OF SURFACE THAT WOULD MELT WHEN HEAT IS APPLIED TO IT.

The letter patches can be applied with an iron or a heat press. 

Iron Application Instructions:

When applying the letter patches with an iron, set your iron to medium/high heat (approximately 150 degrees).

Using a fresh adhesive, lint-roll the surface of your garment where you will be applying your letter patches prior to prepressing to remove any lint.

Pre-press your garment where letter patches will be applied for 10-20 seconds.

Position letter patches on your garment, then cover them with a thin cloth or Teflon sheet. (Optional: Use a heavy metal ruler will help with alignment accuracy.)

Press firmly straight down onto letter patches for 45 seconds in place. DO NOT MOVE IRON BACK AND FORTH.

Turn your garment inside out and press firmly straight down for 30 seconds in place  

Let area cool for 60 seconds. If your letter patches do not fully adhere, then repeat Step 5.

Heat Press Application Instructions:

When applying the letter patches with a heat press, set your heat press temperature to 310 degrees Fahrenheit, the timer to 20 seconds, and the pressure to medium.

Using a fresh adhesive, lint-roll the surface of your garment where you will be applying your letter patches prior to prepressing to remove any lint.

Pre-press your garment where letter patches will be applied for 3-5 seconds.

Position letter patches on your garment, then cover them with a thin cloth or Teflon sheet. (Optional: Use a heavy metal ruler will help with alignment accuracy.)

Press letter patches for 20 seconds.

Turn your garment inside out and repeat Step 5.

Let area cool for 60 seconds. If your letter patches do not fully adhere, then repeat Step 5.

 Wash Instructions:  

  • Wait 24 hours before first wash.
  • It is recommended to wash finished garments inside out in cold water with mild detergent.
  • Do not bleach.
  • Avoid fabric softener.
  • Tumble dry on low setting - For best results, hang to dry.